24/48h Green Water Emergency Service

EHBGW: First Aid For Green Swimming Pool Water

Is your pool suddenly green, cloudy, or slippery? Don’t panic. Follow our proven shock protocol or call our experts to restore crystal-clear water in 24 to 48 hours.

Call technician directly (+32 472 98 70 00)
Quick Diagnosis Matrix

What condition is your pool water in?

Identify the type of algae and immediately find the expected recovery time and correct protocol.

Phase 1: Initial Stage

Light Green & Cloudy Water

The pool floor is still visible, but water loses sparkle and turns light green due to early algae growth.

Recovery time:12 - 24 Hours

Approach: Bring pH to 7.2 + light chlorine shock + 12h continuous filtration with clarifier.

Phase 2: Advanced

Dark Green & Slippery Walls

The floor is invisible. Algae have formed a slippery biofilm on walls and corners.

Recovery time:24 - 48 Hours

Approach: Brush walls + pH to 7.2 + powerful chlorine shock + flocculant + 24/7 pump.

Phase 3: Critical / Blockade

Yellow / Mustard Algae / CYA Block

Persistent yellow-brown spots on floor or chlorine has zero effect due to CYA blockade.

Recovery time:48 - 72 Hours

Approach: CYA check (partial water renewal) + specialized algaecide & shock.

Causes & Water Chemistry

Why does pool water turn green?

Green swimming pool water does not happen overnight. It is almost always caused by an unbalanced chemical level or insufficient filtration allowing algae spores to multiply rapidly.

1. Incorrect pH Level (>7.6 or <7.0)

At a pH of 7.8, over 80% of added chlorine becomes inactive! Algae multiply unchecked.

2. Cyanuric Acid Chlorine Lock (CYA > 70 ppm)

Continuous use of chlorine tablets accumulates cyanuric acid. Above 70 ppm, chlorine is trapped and cannot kill bacteria.

3. Insufficient Filtration Time in Warm Weather

Above 25°C, algae growth rate doubles. Short filtration cycles leave the water stagnant for too long.

Run Quick Diagnosis

Calculate Water Balance Online for Free

Use our smart Water Calculator to determine the LSI (Langelier Saturation Index) and exact product dosages.

Ideal pH value:7.2 - 7.4
Ideal Free Chlorine:1.5 - 2.5 mg/L
Max Cyanuric Acid (CYA):< 50 ppm
Bluesky Pools Protocol

The 5-Step First Aid Protocol

Follow this exact sequence step-by-step to eradicate algae and clear your pool.

01

Correct pH

Set pH level strictly to 7.2 first with pH minus or plus. Incorrect pH renders chlorine shock useless.

Step 1 of 5
02

Brush Walls

Scrub walls and floor thoroughly to break the algae's protective biofilm.

Step 2 of 5
03

Chlorine Shock

Dose fast-acting chlorine shock directly in skimmers or dissolved in a bucket.

Step 3 of 5
04

Clarifier & 24/7 Pump

Add clarifier/flocculant to clump dead algae and circulate pump 24 to 48 hours continuously.

Step 4 of 5
05

Backwash & Waste

Backwash filter every 12 hours and vacuum heavy sediment directly to drain (WASTE mode).

Step 5 of 5
No time or need professional help?

Let Our Technicians Clear Your Green Water within 24h

Our experienced team arrives equipped with heavy-duty mobile pumps and professional photometers across Belgium.

Green Water FAQ

Questions About Restoring Green Pool Water